Payment & Shipping Terms:
|Color:||Black, Red,White||Size:||94.5 X 51.5 X 25mm|
|Chip:||DNA200||Screen:||0.91 Inch OLED|
|Output Wattage:||1-200W||Standard Coil:||0.1-2ohm|
|Thread Type:||510||Battery:||Built-in 4800mAh 35C|
Size: 94.5 x 51.5 x 25mm
Standard coil: 0.1-2ohm
TC coil: 0.08-1.0ohm
Wattage Range: 1-200W
Constant Output Current: 50A
Thread: 510 spring loaded
Battery: Built-in 4800mAh 35C
Screen: 0.91 inch OLED
TC modes: 200℉-600℉/ 90℃-315℃
1. Genuine Evolv DNA200 chip
2. 200W Max Output Wattage
3. 4800mAh (3x Li-po 1600mAh battery)
4. VW & TEMP Control Function
5. Temperature Protection (450℉ by default)
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Locked Mode: Press the fire button 5 times with less than 0.7 seconds will cause the device to enter Locked Mode. You can press the fire button 5 times again to exit Locked Mode.
Power Locked Mode: Holding down both the up and down buttons for 2 seconds will place the device in Power Locked Mode. Under this mode, you will not change the power setting. To exit it, hold up and down buttons for 2 seconds.
Temp Control Mode: In locked Mode, holding down both the up and down buttons for 2 seconds will place the device in TC Mode.
Stealth Mode: While locked, holding the fire and down buttons simultaneously for 5 seconds will switch to stealth Mode. You can do it again to switch back to normal mode.
Resistance Lock: Under Locked mode, hold both the fire and up buttons for 2 seconds to enter Resistance lock mode. Repeat the action will unlock it.
You can download Escribe (at evolvapor site) to get your SDNA 200 connected with a computer.